bpi-bootsel command

How to use bpi-bootsel command (Multi-use SD card supported)

From now on, just download either M2 or M3, then you can switch to any of them as you wish!

bpi-bootsel v1.0.5

usage: bpi-bootsel
           bpi-bootsel IMGFILE
           bpi-bootsel IMGFILE DEVICE

Download BPI-Tools , please run the following command

  1. wget https://github.com/BPI-SINOVOIP/BPI-files/raw/master/debs/bananapi-bpi-tools_1.0.3_armhf.deb

  2. Set up development environment

    2-1: On X86-PC (Ubunut 12.04)

    sudo echo "foreign-architecture armhf" >> /etc/dpkg/dpkg.cfg.d/multiarch

    2-2 :On X86-PC (Ubunut 14.04)

    sudo dpkg --add-architecture armhf

    2-3 :On BananaPI M3/M2Plus do nothing

  3. Install BPI-Tools

    sudo dpkg -i bananapi-bpi-tools*.deb

  4. Creat a folder of BPI-Tools

    mkdir BPI-Tools
    cd BPI-Tools

  5. Update BPI-Tools

    sudo bpi-tools --upgrade

  6. Use bpi-bootsel commnad

    6-1: M3 imgae is switchable to M2_Plus

    sudo bpi-bootsel /usr/lib/u-boot/bananapi/bpi-m2p/BPI_M2P_720P.img.gz

    6-2 : M2_Plus imgae is switchable to M3imgae

    sudo bpi-bootsel /usr/lib/u-boot/bananapi/bpi-m3/BPI_M3_720P.img.gz


Video Demo

https://www.youtube.com/watch?v=HdBNcrOKngM&feature=youtu.be

results matching ""

    No results matching ""