BPI-M64 hardware spec

Hardware Specification of Banana pi BPI-M64

Soc Allwinner A64
CPU 1.2 Ghz Quad-Core ARM Cortex A53 64-Bit Processor. It has 64 and 32 Bit execution states for scalable high performance power – including a NEON Multimedia processing engine.
GPU dual-core MALI-400 MP2 and runs at 500MHz, capable of 1.1 Gpixel/s throughput. Graphics capabilities are slightly higher than the original Xbox’s level of performance. The GPU provides OpenGL ES 2.0, hardware-accelerated OpenVG, 4Kx2Kp30 H.265 decode, and 1080p60 H.264 high-profile encode and decode.
SDRAM 2GB DDR3 with 733MHz(shared with GPU)
Power 5V @ 2A via DC power
GPIO 40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S.
On board Network 10/100/1000Mbps Ethernet (Realtek RTL8211E/D)
Wifi Module WiFi 802.11 b/g/n (AP 6212 module on board)
Bluetooth BT4.0
On board Storage MicroSD (TF) card, eMMC 8G on board (option:16/32/64G)
Display Supports multi-channel HD display: HDMI 1.4 (Type A - full),MIPI Display Serial Interface (DSI) for raw LCD panels,1.4 HDMI resolutions from 4K x 2K HDMI port
Video Multi-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc H.264 decode up to 1080P60,H.265 decode up to 4KP30
Audio outputs HDMI, analog audio (via 3.5 mm TRRS jack), I2S audio (also potentially for audio input)
Camera A CSI input connector Camera:Supports 8-bit YUV422 CMOS sensor interface,Supports CCIR656 protocol for NTSC and PAL,Supports 5M pixel camera sensor ,Supports video capture solution up to 1080p@30fps
Audio input On board microphone
USB 2 USB 2.0 host, 1 USB 2.0 OTG
Buttons Reset button, Power button, U-boot button
Leds Power status Led and RJ45 Led
IR on board IR receiver
DC Power 5V/2A with DC port
battery 3.7V lithium battery power support
Sizes 92mm×60mm
Weight 45g

results matching ""

    No results matching ""