How to burn Linux image to eMMC

OS: please downlod image from forum download link

http://www.banana-pi.org/m2plus-download.html

Step 1: Start up the computer with the SD card which has been burnt with the Linux images.

Step 2: Put the images which you'd like to burn to the EMMC Storage to the USB drive.

Step 3: Run "fdisk -l" command line on your BPI-M2+ and you can see the EMMC path as " /dev/mmcblk1"

sudo fdisk -l

Step 4:Switch to the path of images, and run the command.

sudo dd if= xxx.img of=/dev/mmcblk1 bs=10MB

xxx.img is your image file name

Step 5:When finish burning, remove the SD card, and restart the BPI-M2+

Step 6:Check if the system starts normally on the EMMC flash boot.

results matching ""

    No results matching ""