Banana Pi BPI-W2 40-pin GPIO

Banana Pi BPI-W2 has a 40-pin GPIO header that matches that of the Model Raspberry Pi 3. Following is the Banana Pi GPIO Pinout:

BPI-W2 40 PIN GPIO(CON2)
GPIOPinName DefaultFunction Function2:GPIO
CON1-P01 VCC-3V3
CON1-P02 5VD
CON1-P03 I2C5_SCL GPIO13
CON1-P04 5VD
CON1-P05 I2C5_SDA GPIO14
CON1-P06 GND
CON1-P07 PWM0_0 IGPIO_21
CON1-P08 UR2_TX IGPIO3
CON1-P09 GND
CON1-P10 UR2_RX IGPIO2
CON1-P11 GPIO17 GPIO17
CON1-P12 AO_BCK GPIO58
CON1-P13 I2C3_SDA GPIO25
CON1-P14 GND
CON1-P15 I2C3_SCL GPIO27
CON1-P16 UR2_RTS IGPIO5
CON1-P17 VCC-3V3
CON1-P18 UR2_CTS IGPIO4
CON1-P19 G_MOSI GPIO7
CON1-P20 GND
CON1-P21 G_MISO GPIO4
CON1-P22 IR_TX IGPIO9
CON1-P23 G_SCK GPIO5
CON1-P24 G_CS GPIO6
CON1-P25 GND
CON1-P26 GPIO8 GPIO8
CON1-P27 I2C4_SDA GPIO12
CON1-P28 I2C4_SCL GPIO11
CON1-P29 GPIO100 GPIO100
CON1-P30 GND
CON1-P31 AI_CK GPIO21
CON1-P32 SPDIF GPIO54
CON1-P33 AO_CK GPIO59
CON1-P34 GND
CON1-P35 AO_LRCK GPIO57
CON1-P36 AI_BCK GPIO22
CON1-P37 AI_LRCK GPIO23
CON1-P38 AI_SDO GPIO24
CON1-P39 GND
CON1-P40 AO_D0 GPIO60

UART specification:

Theheader CON3 is the UART interface. For developers of Banana Pi, this is an easy way to get the UART console output to check the system status and log message.

BPI-W2 Debug UART (CON3)
CON2-P1 GND
CON2-P2 UART0-RX
CON2-P3 UART0-TX

results matching ""

    No results matching ""